Author Archives for mgs_jason
Aprilia Tuono 660 + Factory 2021 – 2025 Paddock Stand Bobbins
M6 Bolt fitment- December 7, 2024
- Not categorized
- Posted by mgs_jason
- No comments yet
MGS Performance Paddock Stand Bobbins have been designed to not only raise the rear of the bike for any service work but at the same time to protect the rear swing arm from any damage if dropped.
- Will last longer than any standard nylon paddock stand bobbins
- Manufactured from part aluminium and part high density polymers.
- CNC machined to a larger size for extra protection and durability
- Easy to fit and can be fitted in minutes
- Raise the rear of the bike for any service maintenance work required
- Protect the swing arm
This Kit includes:
X2 = Assembled Paddock Stand Bobbins
X2 = M6 High Tensile Steel Zinc Plated Bolts
X2 = M6 Stainless Steel Washers
X2 = Fitting Instructions
- December 7, 2024
- Not categorized
- Posted by mgs_jason
- No comments yet
MGS Performance Paddock Stand Bobbins have been designed to not only raise the rear of the bike for any service work but at the same time to protect the rear swing arm from any damage if dropped.
- Will last longer than any standard nylon paddock stand bobbins
- Manufactured from part aluminium and part high density polymers.
- CNC machined to a larger size for extra protection and durability
- Easy to fit and can be fitted in minutes
- Raise the rear of the bike for any service maintenance work required
- Protect the swing arm
This Kit includes:
X2 = Assembled Paddock Stand Bobbins
X2 = M6 High Tensile Steel Zinc Plated Bolts
X2 = M6 Stainless Steel Washers
X2 = Fitting Instructions
Aprilia RSV4 1100 + Factory 2019 – 2025 Paddock Stand Bobbins
M6 Bolt fitment- December 7, 2024
- Not categorized
- Posted by mgs_jason
- No comments yet
MGS Performance Paddock Stand Bobbins have been designed to not only raise the rear of the bike for any service work but at the same time to protect the rear swing arm from any damage if dropped.
- Will last longer than any standard nylon paddock stand bobbins
- Manufactured from part aluminium and part high density polymers.
- CNC machined to a larger size for extra protection and durability
- Easy to fit and can be fitted in minutes
- Raise the rear of the bike for any service maintenance work required
- Protect the swing arm
This Kit includes:
X2 = Assembled Paddock Stand Bobbins
X2 = M6 High Tensile Steel Zinc Plated Bolts
X2 = M6 Stainless Steel Washers
X2 = Fitting Instructions
Ducati Dessert X 2025 Models Rear Paddock Stand Bobbins
M8 Bolt Fitment- December 7, 2024
- Not categorized
- Posted by mgs_jason
- Comments Off on Ducati Dessert X 2025 Models Rear Paddock Stand Bobbins
Rear Paddock Stand Bobbins are designed to not only protect the swing arm on the bike but to last longer than your standard nylon cotton reels, manufactured from aluminium and high density polymer materials.
Over a period of time with jacking the rear of the bike up with the rear paddock stand, the hook parts on the stand will eventually damage the nylon cotton reels a lot quicker than what our aluminium spacers will.
The polyethylene bobbin is pressed onto the aluminium spacer to provide strength within the bore where the M6 bolt locates.
Manufactured to a larger size than you standard size cotton reels for extra protection and durability.
!!THIS KIT WILL NOT FIT SINGLE SIDED SWING ARMS!!
MATERIAL SPEC:
- cnc machined bobbins from high density polymers that has excellent sliding properties and resists impacts
- M6 High tensile steel bolts with washers
- T9 grade aluminium spacers
These rear paddock stand bobbins are easy to fit and can be fitted in minutes to the existing M8 tapped holes located in the side of the rear swing arm.
The kit includes:
X2 - Assembled Paddock Stand Bobbins
X2 - M8 Aluminium Spacers
X2 - M8 High Tensile Steel Bolts
X2 - M8 Stainless Steel Washers
X2 - Fitting Instructions
Ducati Streetfighter V2/S 2025 Models Rear Paddock Stand Bobbins
M6 Bolt Fitment- December 7, 2024
- Not categorized
- Posted by mgs_jason
- Comments Off on Ducati Streetfighter V2/S 2025 Models Rear Paddock Stand Bobbins
Rear Paddock Stand Bobbins are designed to not only protect the swing arm on the bike but to last longer than your standard nylon cotton reels, manufactured from aluminium and high density polymer materials.
Over a period of time with jacking the rear of the bike up with the rear paddock stand, the hook parts on the stand will eventually damage the nylon cotton reels a lot quicker than what our aluminium spacers will.
The polyethylene bobbin is pressed onto the aluminium spacer to provide strength within the bore where the M6 bolt locates.
Manufactured to a larger size than you standard size cotton reels for extra protection and durability.
!!THIS KIT WILL NOT FIT SINGLE SIDED SWING ARMS!!
MATERIAL SPEC:
- cnc machined bobbins from high density polymers that has excellent sliding properties and resists impacts
- M6 High tensile steel bolts with washers
- T9 grade aluminium spacers
These rear paddock stand bobbins are easy to fit and can be fitted in minutes to the existing M6 tapped holes located in the side of the rear swing arm.
The kit includes:
X2 - Assembled Paddock Stand Bobbins
X2 - M6 High Tensile Steel Bolts
X2 - M6 Washers
X2 - Fitting Instructions
Ducati Streetfighter V4/S 2025 Models Rear Paddock Stand Bobbins
M6 Bolt Fitment- December 7, 2024
- Not categorized
- Posted by mgs_jason
- Comments Off on Ducati Streetfighter V4/S 2025 Models Rear Paddock Stand Bobbins
Rear Paddock Stand Bobbins are designed to not only protect the swing arm on the bike but to last longer than your standard nylon cotton reels, manufactured from aluminium and high density polymer materials.
Over a period of time with jacking the rear of the bike up with the rear paddock stand, the hook parts on the stand will eventually damage the nylon cotton reels a lot quicker than what our aluminium spacers will.
The polyethylene bobbin is pressed onto the aluminium spacer to provide strength within the bore where the M6 bolt locates.
Manufactured to a larger size than you standard size cotton reels for extra protection and durability.
!!THIS KIT WILL NOT FIT SINGLE SIDED SWING ARMS!!
MATERIAL SPEC:
- cnc machined bobbins from high density polymers that has excellent sliding properties and resists impacts
- M6 High tensile steel bolts with washers
- T9 grade aluminium spacers
These rear paddock stand bobbins are easy to fit and can be fitted in minutes to the existing M6 tapped holes located in the side of the rear swing arm.
The kit includes:
X2 - Assembled Paddock Stand Bobbins
X2 - M6 High Tensile Steel Bolts
X2 - M6 Washers
X2 - Fitting Instructions
Ducati Panigale V4/S 2025 Models Rear Paddock Stand Bobbins
M6 Bolt Fitment- December 7, 2024
- Not categorized
- Posted by mgs_jason
- Comments Off on Ducati Panigale V4/S 2025 Models Rear Paddock Stand Bobbins
Rear Paddock Stand Bobbins are designed to not only protect the swing arm on the bike but to last longer than your standard nylon cotton reels, manufactured from aluminium and high density polymer materials.
Over a period of time with jacking the rear of the bike up with the rear paddock stand, the hook parts on the stand will eventually damage the nylon cotton reels a lot quicker than what our aluminium spacers will.
The polyethylene bobbin is pressed onto the aluminium spacer to provide strength within the bore where the M6 bolt locates.
Manufactured to a larger size than you standard size cotton reels for extra protection and durability.
!!THIS KIT WILL NOT FIT SINGLE SIDED SWING ARMS!!
MATERIAL SPEC:
- cnc machined bobbins from high density polymers that has excellent sliding properties and resists impacts
- M6 High tensile steel bolts with washers
- T9 grade aluminium spacers
These rear paddock stand bobbins are easy to fit and can be fitted in minutes to the existing M6 tapped holes located in the side of the rear swing arm.
The kit includes:
X2 - Assembled Paddock Stand Bobbins
X2 - M6 High Tensile Steel Bolts
X2 - M6 Washers
X2 - Fitting Instructions
Ducati Panigale V2/S 2025 Models Rear Paddock Stand Bobbins
M6 Bolt Fitment- December 7, 2024
- Not categorized
- Posted by mgs_jason
- Comments Off on Ducati Panigale V2/S 2025 Models Rear Paddock Stand Bobbins
Rear Paddock Stand Bobbins are designed to not only protect the swing arm on the bike but to last longer than your standard nylon cotton reels, manufactured from aluminium and high density polymer materials.
Over a period of time with jacking the rear of the bike up with the rear paddock stand, the hook parts on the stand will eventually damage the nylon cotton reels a lot quicker than what our aluminium spacers will.
The polyethylene bobbin is pressed onto the aluminium spacer to provide strength within the bore where the M6 bolt locates.
Manufactured to a larger size than you standard size cotton reels for extra protection and durability.
!!THIS KIT WILL NOT FIT SINGLE SIDED SWING ARMS!!
MATERIAL SPEC:
- cnc machined bobbins from high density polymers that has excellent sliding properties and resists impacts
- M6 High tensile steel bolts with washers
- T9 grade aluminium spacers
These rear paddock stand bobbins are easy to fit and can be fitted in minutes to the existing M6 tapped holes located in the side of the rear swing arm.
The kit includes:
X2 - Assembled Paddock Stand Bobbins
X2 - M6 High Tensile Steel Bolts
X2 - M6 Washers
X2 - Fitting Instructions
- December 7, 2024
- Not categorized
- Posted by mgs_jason
- No comments yet
MGS Performance Spindle Paddock Stand Bobbins have been designed to not only raise the rear of the bike for any service work but at the same time to protect the rear swing arm from any damage if dropped.
This is a must have product for all owners of this model bike as there are no tapped holes in the side of the swing arm for location on our standard paddock bobbins.
- Will last longer than any standard nylon paddock stand bobbins
- Manufactured from part aluminium and part high density polymers.
- CNC machined to a larger size for extra protection and durability
- Secured to the spindle with marine grade stainless steel bar and lock nuts.
- Easy to fit and can be fitted in minutes (fitting instructions included)
- Raise the rear of the bike for any service maintenance work required (can be used with a normal paddock stand)
- Protect the swing arm
This Kit includes:
X2 = Assembled Paddock Stand Bobbins
X2 = Aluminium Spindle Hub Spacers
X1 = Marine Grade Stainless Steel Bar
X2 = M6 Stainless Steel Washers
X2 = M6 Nyloc Nuts
X1 = Fitting Instructions