Author Archives for mgs_jason
Triumph Trident 800 2026+ Fork Spindle Bobbins
Fork Protectors- June 3, 2026
- Not categorized
- Posted by mgs_jason
- No comments yet
MGS Performance fork spindle protectors have been designed to protect the front forks in case the bike is dropped or in a low slide to prevent a costly bill for new ones.
Manufactured in the U.K. using top grade materials that are a cut above the rest.
Easy to locate and can be fitted in seconds, the bobbins locate on either side of the forks where they are held on using a stainless steel threaded bar and nyloc lock nuts for a secure fitment.
We supply not only to road riders but racers all over the world that are thoroughly testing our parts, with this we can evaluate our products performance and these fork protectors are a must for any rider.
Material Specification:
Bobbins - High density polymers
Spacers - Aircraft Grade Aluminium
Spindle Bar - Marine Grade Stainless Steel
- This kit includes:
- X2 Fork Bobbins
- X2 Aluminium Spacers
- X1 M8 Stainless Steel Threaded Bar
- X2 M8 Large Washers
- X2 M8 Nyloc Lock Nuts
- X1 Fitting Instructions
Intended use:
- Protect the Forks
Ducati Streetfighter V4 2025 – 2026 Rear Paddock Stand Bobbins
M6 Bolt Fitment- June 3, 2026
- Not categorized
- Posted by mgs_jason
- Comments Off on Ducati Streetfighter V4 2025 – 2026 Rear Paddock Stand Bobbins
!!!!WILL NOT FIT SINGLE SIDED SWING ARMS!!!!***PLEASE CHECK YOUR BIKE HAS EITHER AN M6 OR M8 TAPPED HOLES IN THE SWING ARM BEFORE ORDERING, THIS KIT IS FOR M8 ONE'S. MGS Performance Paddock Stand Bobbins have been designed to not only raise the rear of the bike for any service work but at the same time to protect the rear swing arm from any damage if dropped.
- Will last longer than any standard nylon paddock stand bobbins
- Manufactured from part aluminium and part high density polymers.
- CNC machined to a larger size for extra protection and durability
- Easy to fit and can be fitted in minutes
- Raise the rear of the bike for any service maintenance work required
- Protect the swing arm
This Kit includes:
X2 = Assembled Paddock Stand Bobbins
X2 = M6 High Tensile Steel Zinc Plated Bolts
X4 = M6 Stainless Steel Washers
Ducati Streetfighter V2 2025 – 2026 Rear Paddock Stand Bobbins
M6 Bolt Fitment- June 3, 2026
- Not categorized
- Posted by mgs_jason
- Comments Off on Ducati Streetfighter V2 2025 – 2026 Rear Paddock Stand Bobbins
!!!!WILL NOT FIT SINGLE SIDED SWING ARMS!!!!***PLEASE CHECK YOUR BIKE HAS EITHER AN M6 OR M8 TAPPED HOLES IN THE SWING ARM BEFORE ORDERING, THIS KIT IS FOR M6 ONE'S. MGS Performance Paddock Stand Bobbins have been designed to not only raise the rear of the bike for any service work but at the same time to protect the rear swing arm from any damage if dropped.
- Will last longer than any standard nylon paddock stand bobbins
- Manufactured from part aluminium and part high density polymers.
- CNC machined to a larger size for extra protection and durability
- Easy to fit and can be fitted in minutes
- Raise the rear of the bike for any service maintenance work required
- Protect the swing arm
This Kit includes:
X2 = Assembled Paddock Stand Bobbins
X2 = M6 High Tensile Steel Zinc Plated Bolts
X4 = M6 Stainless Steel Washers
Ducati Panigale V4 2025 – 2026 Models Rear Paddock Stand Bobbins
M6 Bolt Fitment- June 3, 2026
- Not categorized
- Posted by mgs_jason
- Comments Off on Ducati Panigale V4 2025 – 2026 Models Rear Paddock Stand Bobbins
!!!!WILL NOT FIT SINGLE SIDED SWING ARMS!!!!***PLEASE CHECK YOUR BIKE HAS EITHER AN M6 OR M8 TAPPED HOLES IN THE SWING ARM BEFORE ORDERING, THIS KIT IS FOR M6 ONE'S. MGS Performance Paddock Stand Bobbins have been designed to not only raise the rear of the bike for any service work but at the same time to protect the rear swing arm from any damage if dropped.
- Will last longer than any standard nylon paddock stand bobbins
- Manufactured from part aluminium and part high density polymers.
- CNC machined to a larger size for extra protection and durability
- Easy to fit and can be fitted in minutes
- Raise the rear of the bike for any service maintenance work required
- Protect the swing arm
This Kit includes:
X2 = Assembled Paddock Stand Bobbins
X2 = M6 High Tensile Steel Zinc Plated Bolts
X4 = M6 Stainless Steel Washers
Ducati Panigale V2 2025 – 2026 Models Rear Paddock Stand Bobbins
M6 Bolt Fitment- June 3, 2026
- Not categorized
- Posted by mgs_jason
- Comments Off on Ducati Panigale V2 2025 – 2026 Models Rear Paddock Stand Bobbins
!!!!WILL NOT FIT SINGLE SIDED SWING ARMS!!!!***PLEASE CHECK YOUR BIKE HAS EITHER AN M6 OR M8 TAPPED HOLES IN THE SWING ARM BEFORE ORDERING, THIS KIT IS FOR M6 ONE'S. MGS Performance Paddock Stand Bobbins have been designed to not only raise the rear of the bike for any service work but at the same time to protect the rear swing arm from any damage if dropped.
- Will last longer than any standard nylon paddock stand bobbins
- Manufactured from part aluminium and part high density polymers.
- CNC machined to a larger size for extra protection and durability
- Easy to fit and can be fitted in minutes
- Raise the rear of the bike for any service maintenance work required
- Protect the swing arm
This Kit includes:
X2 = Assembled Paddock Stand Bobbins
X2 = M6 High Tensile Steel Zinc Plated Bolts
X4 = M6 Stainless Steel Washers
Kawasaki Z1100 Models 2026+ Fork Spindle Bobbins
Fork Protectors- June 2, 2026
- Not categorized
- Posted by mgs_jason
- No comments yet
MGS Performance fork spindle protectors have been designed to protect the front forks in case the bike is dropped or in a low slide to prevent a costly bill for new ones.
Manufactured in the U.K. using top grade materials that are a cut above the rest.
Easy to locate and can be fitted in seconds, the bobbins locate on either side of the forks where they are held on using the stainless steel bar and nyloc nuts for secure fitment.
We supply not only to road riders but racers all over the world that are thoroughly testing our parts, with this we can evaluate our products performance and these fork protectors are a must for any rider.
This kit comprises of two bobbins, aluminium spacers, stainless steel threaded bar, washers, lock nuts and easy step by step fitting instructions.
Material Specification:
Bobbins – High Density Polymers
Spacers – Aircraft Grade Aluminium
Spindle Bar – Marine Grade Stainless Steel
- This kit includes:
- X2 Fork Bobbins
- X2 Aluminium Spacers
- X1 M8 Stainless Steel Threaded Bar
- X2 M8 Large Washers
- X2 M8 Nyloc Lock Nuts
- X1 Fitting Instructions
Intended use:
- Protect the Forks
Kawasaki Z1100 Models 2026+ Paddock Stand Bobbins
M8 Bolt Fitment- June 2, 2026
- Not categorized
- Posted by mgs_jason
- No comments yet
MGS Performance Paddock Stand Bobbins have been designed to not only raise the rear of the bike for any service work but at the same time to protect the rear swing arm from any damage if dropped.
- Will last longer than any standard nylon paddock stand bobbins
- Manufactured from part aluminium and part high density polymers.
- CNC machined to a larger size for extra protection and durability
- Easy to fit and can be fitted in minutes
- Raise the rear of the bike for any service maintenance work required
- Protect the swing arm
This Kit includes:
X2 = Assembled Paddock Stand Bobbins
X2 = M8 High Tensile Steel Zinc Plated Bolts
X2 = M8 Stainless Steel Washers
X2 = M8 Aluminium Spacers
X1 = Fitting Instructions
Kawasaki Z1100 Models 2026+ Crash Bobbins FULL KIT
Full Crash Kit- June 2, 2026
- Not categorized
- Posted by mgs_jason
- No comments yet
MGS Performance crash protectors have been designed by our internal team here to help eliminate any damage to the bike in case of a drop or a low slide.Manufactured in the U.K using top grade materials that are easy to locate to the bike, and can be fitted in minutes.We supply to road and race riders all over the world that thoroughly put our products to the test in all ways possible.A must have product for all motorcyclists that want to protect their pride and joy.The bobbins locate on either side of the bike to the existing frame bolt mounting points, this kit includes all the necessary parts for them to bolt straight on.Product Specification:
- Bobbins are manufactured using a high density polymer that has excellent sliding properties and resists impacts
- High tensile steel bolts supplied with washers and lock washers
- Aircraft grade aluminium spacers
- Marine Grade Stainless Steel Bar
- This Kit Includes:
- X2 Crash Bobbins (includes Bolts, Frame Spacers, Washers, Lock Washers and Fitting Instructions)
- X2 M8 Paddock Stand Bobbins (includes Bolts, Aluminium Spacers, Washers and Fitting Instructions)
- X2 Fork Protector Bobbins (includes Fork Spindle Bar, Spacers, Washers, Lock Nuts and Fitting Instructions)
Kawasaki Z1100 Models 2026+ Crash Bobbins
Frame Protectors- June 2, 2026
- Not categorized
- Posted by mgs_jason
- No comments yet
MGS Performance crash protectors have been designed by our internal team here to help eliminate any damage to the bike in case of a drop or a low slide.Manufactured in the U.K using top grade materials that are easy to locate to the bike, and can be fitted in minutes.We supply to road and race riders all over the world that thoroughly put our products to the test in all ways possible.A must have product for all motorcyclists that want to protect their pride and joy.The bobbins locate on either side of the bike to the existing frame bolt mounting points, this kit includes all the necessary parts for them to bolt straight on.Product Specification:- Bobbins are manufactured from a high density polymer that has excellent sliding properties and resists impacts
- High tensile steel bolts supplied with washers and lock washers
- Aircraft grade aluminium spacers
- Easy to fit and come with all the necessary parts to locate them onto the existing frame bolt holes.
- This Kit Includes:
- X2 Crash Bobbins
- X2 Aluminium Frame Spacers
- X2 M10 High tensile Steel Zinc Plated Bolts
- X2 M10 Zinc Plated Washers
- X2 M10 Stainless Steel Lock Washers
- X1 Fitting Instructions
