Author Archive: mgs_jason

MGS Performance Paddock Stand Bobbins have been designed to not only raise the rear of the bike for any service work but at the same time to protect the rear swing arm from any damage if dropped.

• Will last longer than any standard nylon paddock stand bobbins
• Manufactured from part aluminium and part high density polymers.
• CNC machined to a larger size for extra protection and durability
• Easy to fit and can be fitted in minutes

Manufactured to last longer over a period of time with jacking the rear of the bike up with a paddock stand, the hook parts on this will eventually damage standard nylon paddock bobbins a lot quicker than what our aluminium ones will. The bobbin part is pressed onto the paddock spacer to provide strength within the bore where the bolt locates. Intended use:

• Raise the rear of the bike for any service maintenance work required
• Protect the swing arm

This Kit includes:

X2 = Assembled Paddock Stand Bobbins

X2 = M6 High Tensile Steel Zinc Plated Bolts

X2 = M6 Stainless Steel Washers

MGS Performance fork spindle protectors have been designed to protect the front forks in case the bike is dropped or in a low slide to prevent a costly bill for new ones.

Manufactured in the U.K. using top grade materials that are a cut above the rest.

Easy to locate and can be fitted in seconds, the bobbins locate on either side of the forks where they are held on using a stainless steel threaded bar and nyloc nuts for secure fitment.

We supply not only to road riders but racers all over the world that are thoroughly testing our parts, with this we can evaluate our products performance and these fork protectors are a must for any rider.

Bobbins - High Density Polymers

Spacers - Aircraft Grade Aluminium

Spindle Bar - Marine Grade Stainless Steel

MGS Performance Paddock Stand Bobbins have been designed to not only raise the rear of the bike for any service work but at the same time to protect the rear swing arm from any damage if dropped.

• Will last longer than any standard nylon paddock stand bobbins
• Manufactured from part aluminium and part high density polymers.
• CNC machined to a larger size for extra protection and durability
• Easy to fit and can be fitted in minutes

Manufactured to last longer over a period of time with jacking the rear of the bike up with a paddock stand, the hook parts on this will eventually damage standard nylon paddock bobbins a lot quicker than what our aluminium ones will. The bobbin part is pressed onto the paddock spacer to provide strength within the bore where the bolt locates. Intended use:

• Raise the rear of the bike for any service maintenance work required
• Protect the swing arm

This Kit includes:

X2 = Assembled Paddock Stand Bobbins

X2 = M8 High Tensile Steel Zinc Plated Bolts

X2 = M8 Stainless Steel Washers

X2 = M8 Aluminium Spacers

MGS Performance Paddock Stand Bobbins have been designed to not only raise the rear of the bike for any service work but at the same time to protect the rear swing arm from any damage if dropped.

• Will last longer than any standard nylon paddock stand bobbins
• Manufactured from part aluminium and part high density polymers.
• CNC machined to a larger size for extra protection and durability
• Easy to fit and can be fitted in minutes

Manufactured to last longer over a period of time with jacking the rear of the bike up with a paddock stand, the hook parts on this will eventually damage standard nylon paddock bobbins a lot quicker than what our aluminium ones will. The bobbin part is pressed onto the paddock spacer to provide strength within the bore where the bolt locates. Intended use:

• Raise the rear of the bike for any service maintenance work required
• Protect the swing arm

This Kit includes:

X2 = Assembled Paddock Stand Bobbins

X2 = M8 High Tensile Steel Zinc Plated Bolts

X2 = M8 Stainless Steel Washers

X2 = M8 Aluminium Spacers

X1 = Fitting Instructions

MGS Performance Paddock Stand Bobbins have been designed to not only raise the rear of the bike for any service work but at the same time to protect the rear swing arm from any damage if dropped.

• Will last longer than any standard nylon paddock stand bobbins
• Manufactured from part aluminium and part high density polymers.
• CNC machined to a larger size for extra protection and durability
• Easy to fit and can be fitted in minutes

Manufactured to last longer over a period of time with jacking the rear of the bike up with a paddock stand, the hook parts on this will eventually damage standard nylon paddock bobbins a lot quicker than what our aluminium ones will. The bobbin part is pressed onto the paddock spacer to provide strength within the bore where the bolt locates. Intended use:

• Raise the rear of the bike for any service maintenance work required
• Protect the swing arm

This Kit includes:

X2 = Assembled Paddock Stand Bobbins

X2 = M6 High Tensile Steel Zinc Plated Bolts

X2 = M6 Stainless Steel Washers

X1 = Fitting Instructions

MGS Performance Paddock Stand Bobbins have been designed to not only raise the rear of the bike for any service work but at the same time to protect the rear swing arm from any damage if dropped.

• Will last longer than any standard nylon paddock stand bobbins
• Manufactured from part aluminium and part high density polymers.
• CNC machined to a larger size for extra protection and durability
• Easy to fit and can be fitted in minutes

Manufactured to last longer over a period of time with jacking the rear of the bike up with a paddock stand, the hook parts on this will eventually damage standard nylon paddock bobbins a lot quicker than what our aluminium ones will. The bobbin part is pressed onto the paddock spacer to provide strength within the bore where the bolt locates. Intended use:

• Raise the rear of the bike for any service maintenance work required
• Protect the swing arm

This Kit includes:

X2 = Assembled Paddock Stand Bobbins

X2 = M6 High Tensile Steel Zinc Plated Bolts

X2 = M6 Stainless Steel Washers

X2 = Fitting Instructions

MGS Performance Paddock Stand Bobbins have been designed to not only raise the rear of the bike for any service work but at the same time to protect the rear swing arm from any damage if dropped.

• Will last longer than any standard nylon paddock stand bobbins
• Manufactured from part aluminium and part high density polymers.
• CNC machined to a larger size for extra protection and durability
• Easy to fit and can be fitted in minutes

Manufactured to last longer over a period of time with jacking the rear of the bike up with a paddock stand, the hook parts on this will eventually damage standard nylon paddock bobbins a lot quicker than what our aluminium ones will. The bobbin part is pressed onto the paddock spacer to provide strength within the bore where the bolt locates. Intended use:

• Raise the rear of the bike for any service maintenance work required
• Protect the swing arm

This Kit includes:

X2 = Assembled Paddock Stand Bobbins

X2 = M6 High Tensile Steel Zinc Plated Bolts

X2 = M6 Stainless Steel Washers

X2 = Fitting Instructions

MGS Performance Paddock Stand Bobbins have been designed to not only raise the rear of the bike for any service work but at the same time to protect the rear swing arm from any damage if dropped.

• Will last longer than any standard nylon paddock stand bobbins
• Manufactured from part aluminium and part high density polymers.
• CNC machined to a larger size for extra protection and durability
• Easy to fit and can be fitted in minutes

Manufactured to last longer over a period of time with jacking the rear of the bike up with a paddock stand, the hook parts on this will eventually damage standard nylon paddock bobbins a lot quicker than what our aluminium ones will. The bobbin part is pressed onto the paddock spacer to provide strength within the bore where the bolt locates. Intended use:

• Raise the rear of the bike for any service maintenance work required
• Protect the swing arm

This Kit includes:

X2 = Assembled Paddock Stand Bobbins

X2 = M6 High Tensile Steel Zinc Plated Bolts

X2 = M6 Stainless Steel Washers

X2 = Fitting Instructions

MGS Performance Paddock Stand Bobbins have been designed to not only raise the rear of the bike for any service work but at the same time to protect the rear swing arm from any damage if dropped.

• Will last longer than any standard nylon paddock stand bobbins
• Manufactured from part aluminium and part high density polymers.
• CNC machined to a larger size for extra protection and durability
• Easy to fit and can be fitted in minutes

Manufactured to last longer over a period of time with jacking the rear of the bike up with a paddock stand, the hook parts on this will eventually damage standard nylon paddock bobbins a lot quicker than what our aluminium ones will. The bobbin part is pressed onto the paddock spacer to provide strength within the bore where the bolt locates. Intended use:

• Raise the rear of the bike for any service maintenance work required
• Protect the swing arm

This Kit includes:

X2 = Assembled Paddock Stand Bobbins

X2 = M6 High Tensile Steel Zinc Plated Bolts

X2 = M6 Stainless Steel Washers

X2 = Fitting Instructions